The effect of root canal preparation tapers on planktonic bacteria and biofilm reduction in the apical third: A correlative microtomography and microbiological laboratory study.

AIM: To evaluate the influence of different preparation tapers on the reduction in planktonic bacteria and biofilms of Enterococcus faecalis and Candida albicans in the apical third (4 mm) of the mesial roots of mandibular molars, correlating decontamination with canal shape. METHODOLOGY: After microtomography analysis for morphological standardization of the canals, 48 mandibular molar roots, each containing two canals (96 canals), were contaminated with E. faecalis and C. albicans and divided into four groups (n = 11) for canal instrumentation using ProDesign Logic 2 files with different tapers G (.03): # 25.03; G (.04): # 25.04; G (.05): # 25.05; and G (.06): # 25.06 and irrigation with 2.5% sodium hypochlorite. Four roots were examined under a scanning electron microscope (SEM) to qualitatively assess biofilm formation. Eight roots were used as the negative control group (samples were not contaminated). Bacteriological samples were taken exclusively from the apical third of the roots before and after chemical-mechanical preparation and bacterial counts were determined (CFU/mL). The final micro-CT scan was used to quantify the volume variation and unprepared canal area in the apical third. Statistical analysis was performed using the Kruskal-Wallis, Student-Newman-Keuls and Wilcoxon tests for analysis of microbiological data. anova and the Tukey or Games-Howell test were used for analysis of micro-CT data and Spearman's test for correlations (α = 5%). RESULTS: All groups showed a significant reduction in bacteria (p < .05), with no statistically significant difference between groups. There was no significant difference in per cent volume increase between groups. The unprepared area (Δ%) was affected by the file used (p = .026) and was significantly lower for G (.06) compared to G (.03). There was no statistically significant correlation among bacterial reduction, volume and unprepared area (p > .05). CONCLUSION: The different preparation tapers influenced root canal shaping in the apical third but did not improve decontamination in this region.

Analysis of the penetration of NaOCl 5.25% into dentinal tubules using different irrigation protocols: An ex vivo study.

The objective of the study was to investigate the 5.25% sodium hypochlorite (NaOCl) penetration into the dentinal tubules after different irrigation methods. Seventy canines were stained with 1% crystal violet and divided into groups (n = 20): GEC-EasyClean; GPUI-E1 Irrisonic ultrasonic insert; GXP-XP-Endo finisher; GPC-conventional irrigation and GNC-stained tooth without irrigation. Axial sections (16×) were assessed and irrigant penetration was quantified as a bleaching halo on the surface of the apical, middle and coronal third. In the apical third, GPUI promoted greater NaOCl penetration (p < 0.05). GXP was better than GEC (p < 0.05), as was GPC (p > 0.05). The GPUI and GXP groups were similar in the middle and coronal third (p > 0.05). GPUI and GXP showed better results than GEC (p < 0.05). GPUI was more effective in the apical third and like GXP in the cervical and middle third.

Evaluation of the rotary kinematics between actual and set speeds of X-Smart Plus, VDW.Silver and iRoot motors.

The present study evaluated the actual rotational speed of three different endodontic motors compared to the values provided by the manufacturers. A total of three endodontic motors (X-Smart Plus, VDW.Silver, and iRoot) were tested at 400 rpm and 800 rpm and 2 N/cm2 torque. The kinematics of the devices was recorded by using a custom angle-measuring disc with a 50-mm diameter attached to the handpiece provided by the manufacturer, whereas their movement was captured by a high-speed camera at 2,400 frames per second, 800 x 800 pixel-resolution and distance of 0.3 m from the target object. Statistical analysis was performed at a significance level of 5%. At 400 rpm, the iRoot motor had a value of 17.94 rpm above that indicated by the manufacturer, which was significantly different from those of X-Smart Plus (5.20 rpm below that indicated by the manufacturer) and VDW.Silver (0.62 rpm above that indicated by the manufacturer) motors (P < 0.05). At 800 rpm, the iRoot motor had a value of 51.34 rpm below that indicated by the manufacturer, whereas the X-Smart Plus motor had a value of 13.00 rpm below that indicated by the manufacturer (P > 0.05). The VDW.Silver motor statistically differed from the iRoot and X-Smart Plus ones, showing a value of 1.68 rpm above that indicated by the manufacturer. In conclusion, the X-Smart Plus, VDW.Silver, and iRoot motors showed lower variations in the rotational speed values compared to those reported by their manufacturers. The endodontic motors presented different behaviors between them, with the VDW.Silver motor presents the most accurate values and the iRoot presents the most divergent values.

Tooth color change after photodynamic therapy in endodontics: A systematic review.

BACKGROUND: A smile is considered one of the most important soft skills in social interaction. And discolored teeth may effect this. It is known that some photosensitizer agents (PS) used in photodynamic therapy (PDT) during root canal treatment could play a significant role in tooth color change, and thus the main objective of this systematic review is to address whether performing PDT can influence tooth color change and to synthesize the most effective methods to remove PS from the root canal system. METHODS: This study followed the PRISMA 2020 statement, and the protocol was registered at the Open Science Framework. Two blinded reviewers searched five databases up to November 20th, 2022: Web of Science, PubMed, Scopus, Embase, and the Cochrane Library. The eligibility criteria were studies that investigated tooth color change after PDT in endodontics. RESULTS: A total of 1695 studies were retrieved, and 7 were included in the qualitative analysis. All the included studies were in vitro evidence and investigated five different PS: methylene blue, toluidine blue O, malachite green, indocyanine green, and curcumin. Besides curcumin and indocyanine green, the remaining agents all caused tooth color change, and no method employed was effective in fully removing these PS from inside the root canal system CONCLUSIONS: Even though the findings showed that curcumin and indocyanine green did not influence tooth color change, the present evidence should be interpreted with caution since it is based on laboratory studies with questionable methods, and all efforts should be employed to avoid this undesirable side effect during clinical practice.

Evaluation of the rotary kinematics between actual and set speeds of X-Smart Plus, VDW.Silver and iRoot motors

Abstract The present study evaluated the actual rotational speed of three different endodontic motors compared to the values provided by the manufacturers. A total of three endodontic motors (X-Smart Plus, VDW.Silver, and iRoot) were tested at 400 rpm and 800 rpm and 2 N/cm2 torque. The kinematics of the devices was recorded by using a custom angle-measuring disc with a 50-mm diameter attached to the handpiece provided by the manufacturer, whereas their movement was captured by a high-speed camera at 2,400 frames per second, 800 x 800 pixel-resolution and distance of 0.3 m from the target object. Statistical analysis was performed at a significance level of 5%. At 400 rpm, the iRoot motor had a value of 17.94 rpm above that indicated by the manufacturer, which was significantly different from those of X-Smart Plus (5.20 rpm below that indicated by the manufacturer) and VDW.Silver (0.62 rpm above that indicated by the manufacturer) motors (P < 0.05). At 800 rpm, the iRoot motor had a value of 51.34 rpm below that indicated by the manufacturer, whereas the X-Smart Plus motor had a value of 13.00 rpm below that indicated by the manufacturer (P > 0.05). The VDW.Silver motor statistically differed from the iRoot and X-Smart Plus ones, showing a value of 1.68 rpm above that indicated by the manufacturer. In conclusion, the X-Smart Plus, VDW.Silver, and iRoot motors showed lower variations in the rotational speed values compared to those reported by their manufacturers. The endodontic motors presented different behaviors between them, with the VDW.Silver motor presents the most accurate values and the iRoot presents the most divergent values.

Resumo O presente estudo avaliou a real velocidade rotacional de três diferentes motores endodônticos comparados aos valores fornecidos pelos fabricantes. Um total de três motores endodônticos (X-Smart Plus, VDW.Silver e iRoot) foram testados a 400 rpm e 800 rpm e torque de 2 N/cm2. A cinemática dos dispositivos foi verificada utilizando-se um disco customizado de 50 mm de diâmetro acoplado ao contra ângulo fornecido pelo fabricante e o movimento foi capturado através de uma câmera ajustada em 2400 quadros por segundo com resolução de 800 x 800 pixels distante 0,3 m do objeto alvo. A análise estatística foi realizada com nível de significância de 5%. A 400 rpm, o motor iRoot apresentou 17,94 rpm acima do indicado pelo fabricante, sendo o valor significativamente diferente do X-Smart Plus (5,20 rpm abaixo do indicado pelo fabricante) e VDW.Silver (0.62 rpm acima do indicado pelo fabricante) (P > 0,05). A 800 rpm, iRoot apresentou 51.34 rpm abaixo do indicado pelo fabricante e X-Smart Plus 13,00 rpm abaixo do indicado pelo fabricante (P > 0,05). VDW.Silver foi estatisticamente diferente de iRoot e X-Smart Plus, apresentando 1,68 rpm acima do indicado pelo fabricante. Concluiu-se que os motores X-Smart Plus, VDW.Silver e iRoot apresentaram baixa variação na velocidade rotacional quando comparada ao fornecido pelo fabricante. Os motores endodônticos apresentaram diferentes comportamentos entre eles, sendo que o motor VDW.Silver apresentou valores mais acurados enquanto o iRoot foi o mais divergente.

Influence of different working lengths on the shaping ability of Reciproc Blue in the apical third and apical foramen: a micro-computed tomographic study

Aim: This study aimed to assess the shaping ability of Reciproc Blue in the apical third and apical foramen of moderately curved canals at different working lengths (WLs), by micro-computed tomography. Methods: Thirty-six mesial roots (mesiobuccal and mesiolingual canals) were included, each with 2 separate root canals and independent apical foramina, according to type IV of Vertucci's classification of first and second mandibular molars. The canals were instrumented at three different WLs: G-1, 1mm short of the major apical foramen; G0, at the major apical foramen; G+1, 1mm beyond the major apical foramen. The groups were assessed for changes in root canal volume and untouched wall area in the apical third. Groups G0 and G+1 were also compared for percentage of untouched walls at the apical foramen. One-way ANOVA (post hoc Tukey test) and Student's t-test adopted a 5% level of significance. Results: Root canal volumes (mm3) in the apical third were 22.86±10.46, 44.48±24.91, and 55.71±21.32 in G-1, G0 and G+1, respectively. G-1 volume following instrumentation increased significantly less than that of G0 or G+1 (P>.05); G0 did not differ from G+1. The percentage of untouched wall area in the apical third did not differ among the three groups (P>.05). G0 and G+1 did not differ regarding untouched walls in the major apical foramem walls. Conclusion: Extending the WL from 1mm short of the apical foramen to a point at and beyond the WL increases the apical third volume without increasing the prepared area. Untouched surface areas of the apical foramen were not modified by instrumentation at or beyond the foramen

Reciprocating Kinematics of X-Smart Plus, VDW Silver and, iRoot Endodontic Motors: A Comparison Between Real and Set Values.

This study assessed 3 endodontic motors, X-Smart Plus (Dentsply Sirona, Ballaigues, Switzerland), VDW.Silver Reciproc (VDW GmbH, München, Germany) and, iRoot (Bassi Endodontics, Belo Horizonte, Brazil) in 2 different reciprocating settings. The movements evaluated were 170° in counter-clockwise (CCW) and 50° in clockwise (CW) at 350 RPM, and 150° CCW and 30° CW at 300 RPM. For the X-Smart Plus and VDW Silver the settings used were the ones in the motor library. For the iRoot, the motor was adjusted to the angles of the study. A customized optic target was attached to the contra-angle of the motor and the movements were recorded with a high-resolution camera (K2 DistaMaxTM Long-Distance Microscope System, Infinity Photo-Optical Company, Colorado, EUA) at 2,400 frames per second (FPS). The images were analyzed with the Vision Research software (Inc. Headquarters, Wayne, New Jersey, EUA). The following kinematic parameters were assessed: CCW angle, CW angle, speed (RPM) at both directions, and, standstill time at each change of directions. The Intraclass Correlation Coefficient (ICC) and Kruskal-Wallis (method of Dunn) were used at a significant level of 5%. There was no statistically significant difference among the motors at the 150°/30° setting (P > .05); the iRoot was the least reliable at the 170°/50° setting for CCW angle, speed, and net angle parameters (P < 0.05). The standstill time of all motors in both directions was identical. None of the motors were able to reproduce faithfully the set movements. The iRoot motor presented a higher discrepancy when compared to X-Smart and VDW Silver.

Apical periodontitis in mesiobuccal roots of maxillary molars: influence of anatomy and quality of root canal treatment, a CBCT study.

Objectives: This study aimed to evaluate the prevalence of apical periodontitis (AP) in the mesiobuccal roots of root canal-treated maxillary molars. Materials and Methods: One thousand cone-beam computed tomography images of the teeth were examined by 2 dental specialists in oral radiology and endodontics. The internal anatomy of the roots, Vertucci's classification, quality of root canal treatment, and presence of missed canals were evaluated; additionally, the correlation between these variables and AP was ascertained. Results: A total of 1,000 roots (692 first molars and 308 second molars) encompassing 1,549 canals were assessed, and the quality of the root canal filling in the majority (56.9%) of the canals was satisfactory. AP was observed in 54.4% of the teeth. A mesiolingual canal in the mesiobuccal root (MB2 canal) was observed in 54.9% of the images, and the majority (83.5%) of these canals were not filled. Significant associations were observed between the presence of an MB2 canal and the quality of the root canal filling and the presence of AP. Conclusions: AP was detected in more than half of the images. The MB2 canals were frequently missed or poorly filled.

Reciprocating Kinematics of X-Smart Plus, VDW Silver and, iRoot Endodontic Motors: A Comparison Between Real and Set Values

Abstract This study assessed 3 endodontic motors, X-Smart Plus (Dentsply Sirona, Ballaigues, Switzerland), VDW.Silver Reciproc (VDW GmbH, München, Germany) and, iRoot (Bassi Endodontics, Belo Horizonte, Brazil) in 2 different reciprocating settings. The movements evaluated were 170° in counter-clockwise (CCW) and 50° in clockwise (CW) at 350 RPM, and 150° CCW and 30° CW at 300 RPM. For the X-Smart Plus and VDW Silver the settings used were the ones in the motor library. For the iRoot, the motor was adjusted to the angles of the study. A customized optic target was attached to the contra-angle of the motor and the movements were recorded with a high-resolution camera (K2 DistaMaxTM Long-Distance Microscope System, Infinity Photo-Optical Company, Colorado, EUA) at 2,400 frames per second (FPS). The images were analyzed with the Vision Research software (Inc. Headquarters, Wayne, New Jersey, EUA). The following kinematic parameters were assessed: CCW angle, CW angle, speed (RPM) at both directions, and, standstill time at each change of directions. The Intraclass Correlation Coefficient (ICC) and Kruskal-Wallis (method of Dunn) were used at a significant level of 5%. There was no statistically significant difference among the motors at the 150°/30° setting (P > .05); the iRoot was the least reliable at the 170°/50° setting for CCW angle, speed, and net angle parameters (P < 0.05). The standstill time of all motors in both directions was identical. None of the motors were able to reproduce faithfully the set movements. The iRoot motor presented a higher discrepancy when compared to X-Smart and VDW Silver.

Resumo Este estudo avaliou 3 motores endodônticos, X-Smart Plus (Dentsply Sirona, Ballaigues, Suíça), VDW.Silver Reciproc (VDW GmbH, Munique, Alemanha) e iRoot (Bassi Endodontics, Belo Horizonte, Brasil) em 2 diferentes ajustes de movimento reciprocante. Os movimentos analisados foram: 170° em sentido anti-horário (CCW) e 50° em sentido horário (CW) a 350 RPM, e 150° CCW e 30° CW a 300 RPM. Para os motores X-Smart Plus e VDW Silver os ajustes usados foram os que se apresentam nos ajustes pré-definidos dos motores. Para o iRoot o motor foi ajustado para os ângulos do estudo. Um alvo ótico customizado foi preso ao contra ângulo do motor e os movimentos foram gravados com uma câmara de alto resolução (K2 DistaMaxTM Long-Distance Microscope System, Infinity Photo-Optical Company, Colorado, EUA) a 2.400 quadros por segundo (FPS). As imagens foram analisadas com o sotware Vision Research (Inc. Headquarters, Wayne, Nova Jersey, USA). Os seguintes parâmetros de cinemática foram avaliados: ângulo anti-horário, ângulo horário, ângulo líquido, velocidade (RPM) em ambas direções e tempo de parada a cada mudança de direção. O Coeficiente de Correlação Intraclasse (ICC) e o teste de Kruskal-Wallis (método de Dunn) foram usados com nível de significâncias de 5%. Não houve diferença estatisticamente significante entre os motores no ajuste de 150°/30° (P > .05); o motor iRoot foi o menos confiável no ajuste de 170°/50° para o ângulo anti-horário, velocidade e ângulo líquido (P < 0.05). O tempo de parada em todos os motores foi idêntico em ambas as direções. Nenhum dos motores foi capaz de reproduzir fielmente os movimentos. O motor iRoot apresentou maior discrepância quando comparado com o X-Smart Plus e VDW Silver.

Effect of ethanol-conditioned dentine on sealer penetration into dentinal tubules: a confocal microscopy study

Aim: The aim of this study was to evaluate the effect of ethanol-conditioned dentin on endodontic sealer penetration into dentinal tubules by confocal laser scanning microscopy (CLSM). Methods: Forty human maxillary anterior teeth were instrumented and divided into four groups (n = 10) according to the drying methods: 1) wet: vacuum only, 2) paper points: vacuum + absorbent paper points, (3) 70% ethanol: 70% ethanol (1 min) + vacuum + absorbent paper points, and (4) 100% ethanol: 100% ethanol (1 min) + vacuum + absorbent paper points. All root canals were filled with resin-based endodontic sealer. Four sections from each third (cervical, middle, and apical) were examined by CLSM. Root canal wall perimeter infiltrated by sealer, maximum depth of sealer penetration, percentage of penetrated area, and fluorescence intensity of rhodamine B were measured. Statistical analysis was performed by analysis of variance and Tukey's tests (α = 0.05). Results: No statistical difference was found when percentage of root canal wall coverage infiltrated by sealer were compared. The groups in which ethanol solutions were used presented greater depth of sealer penetration, higher percentage of penetrated area, and higher fluorescence intensity of rhodamine B (p< 0.05) when compared with the wet and paper point groups. Overall, 100% ethanol produced better results than 70% ethanol, except for rhodamine B intensity (cervical third). In addition, the absorbent paper points drying method behaved better than did vacuum only group, except for rhodamine B intensity (apical third). Conclusion: Ethanol-conditioned dentin improved the penetration of resin-based sealer into dentinal tubules, especially at the concentration of 100%

Estudo da anatomia de incisivos inferiores em uma população da região Sudeste brasileira, usando TCFC / CBCT assessment of mandibular incisors anatomy in a population from Southeastern Brazil

Objetivo: Avaliar, por meio de tomografia computadorizada de feixe cônico (TCFC), a morfologia dos canais radiculares de dentes incisivos inferiores, em uma população da região Sudeste brasileira, e sua relação com a idade e o sexo dos pacientes Métodos: Foram analisados 371 prontuários de pacientes de ambos os sexos que continham exames de TCFC, totalizando 1.484 dentes incisivos inferiores. As imagens tomográficas foram capturadas com o tomógrafo Orthopantomograph OP300, com voxel de 0,20mm. A morfologia dos dentes foi avaliada de acordo com a classificação de Vertucci, e foram investigados os efeitos do sexo e da idade dos pacientes sobre a variação na morfologia desses dentes. Resultados: Todos os dentes avaliados apresentaram apenas uma raiz; 80,7% dos incisivos inferiores apresentaram um único canal (Tipo I de Vertucci). O segundo canal esteve presente em 19,3% dos casos, sendo do Tipo II de Vertucci em 1,1%, Tipo III em 18,1%, Tipo IV em 0,1% e Tipo V em 0,1%. Não houve influência estatisticamente significativa (p=0,890) do sexo na morfologia dos incisivos inferiores. Dentro da faixa etária analisada, os indivíduos com menos de 18 anos e aqueles com 40 a 49 anos (28,2% e 26,8% respectivamente) apresentaram significância estatística (p=0,001) quanto à presença de segundo canal, compa- rados aos de outras faixas etárias. Conclusões: A morfologia mais prevalente foi a Tipo I de Vertucci, seguida pelo Tipo III, sem diferença entre os sexos, e com maior prevalência de variação morfológica nos indivíduos com menos de 18 anos e com 40 a 49 anos de idade (AU).

Objective: Evaluate the root canal morphology of per- manent mandibular incisors, through the use of cone bean computed tomography (CBCT) in a population of Brazilian southeast region and its relationship with patient age and sex. Methods: A total of 1,484 mandibular incisors of 371 male and female patient`s medical records were analyzed using CBCT. The tomographic images were by the orthopantomograph OP300 tomograph, with voxel of 0.20 mm. The morphology of the teeth was evaluated according to the classification of VERTUCCI, and the effects of sex and age of the patients on the variation in the morphology of these teeth were investigated. Results: All evaluated teeth had only one root. A single canal (Ver- tuccis type I) was detected in 80.7% of mandibular incisors. The second canal was present in 19.3% of the cases, with rates of 1.1% for Type II, 18.1% for Type III, 0.1% for Type IV, and 0.1% for Type V. According to sex, there was no statistical difference (p = 0.890) in mandibular incisor morphology. Within the analyzed age group, individuals aged under 18 years and individuals between 40 and 49 years (28.2% and 26,8% respectively) were statistically significant (p = 0.001) when compared to the other age groups. Conclusions: The most prevalent morphology was Type I of VERTUCCI, followed by Type III, without difference between sex and with a higher prevalence of morphological variation in individuals with less than 18 years and between 40 and 49 years (AU).

Evaluation of apical transportation and apical root sealing in root canals prepared with mtwo rotary system with and without apical enlargement ­ an in vitro study

The aim of this study was to evaluate apical transportation and apical root canal sealing after root canal filling in human teeth prepared with MTwo® Rotary System with and without apical foramen enlargement. Twenty mandibular premolars were divided into two groups (n=10). Group 1 had root canals prepared 1mm beyond the apical foramen. Group 2 had root canals prepared 1mm below the root canal length. After chemo-mechanical preparation, samples were submitted to scanning electronic microscopy. Apical foramen images had 75x magnification at standardized positions, allowing measurements from the apical foramen area before and after root canal preparation, and after root canal filling. Apical foramen shape and apical transportation, as well as its level of circumferential filling after root canal preparation were accessed using the Image Subtraction System. Scanning electronic microscopy analysis demonstrated that samples of Group 1 showed larger foraminal diameter than samples of Group 2 (p<0.05). Apical foramen transportation was statistically different between Groups 1 and 2 (p=0.0108). Furthermore, the apical foramen sealing also differed statistically between groups 1 and 2 (p=0.0007) and 100% of samples of Group 1 showed apical root canal sealing. Apical root canal sealing was more effective when the root canal was prepared with apical foramen enlargement, even when the apical transportation was detected.

Biossegurança para prevenção da contaminação cruzada na prática odontológica / Biosafety to prevent cross-infection in dental practice

O objetivo desse manual é servir como um guia para os discentes, docentes e funcionários da Faculdade de Odontologia de Piracicaba em relação às medidas a serem adotadas para que se promovam boas práticas de biossegurança durante os procedimentos de prestação de serviços de saúde

Avaliação do tratamento endodôntico em sessão única e retratamento não cirúrgico com alargamento foraminal de dentes com periodontite apical / Evaluation of single visit endodontic treatment and non-surgical retreatment with foraminal enlargment of teeth with apical periodontitis ?

Objective: to evaluate the root canal treatment (RCT) and non-surgical root canal retreatment (NSRCR), associated with foraminal enlargement, performed on a singlevisit. Material and Methods: 125 teeth with apical periodontitis and follow-up period ranging from 6 to 12 months were included. The success was considered by the absence of signs and symptoms and complete or incomplete periapical repair. Logistic regression analyses were used to identify factors associated with the repair (p<0.05). Results: RCT showed 71.58% of complete healing and 23.16% of acceptable healing. NSRCR showed 80% of complete healing and 20% of acceptable healing. Age, gender, type of treatment and preoperative pain were not statistically significant for the healing process (p>0.05). Premolars showed the greatest chance of periapical repair. Pulp Canal Sealer showed a greater chance of periapical repair when compared to Sealapex (p<0.05). Conclusion: RCT and NSRCR using a foraminal enlargement protocol provided a favorable prognosis of periapical healing

Objetivo: avaliar o tratamento endodôntico (TE) e o retratamento não cirúrgico do canal radicular (RNCCR), associado a ampliação foraminal, realizado em sessão única. Material e Métodos: foram incluídos 125 dentes com periodontite apical e proservação de 6 a 12 meses. O sucesso foi considerado pela ausência de sinais e sintomas e reparo periapical completo ou incompleto. Análises de regressão logística foram utilizadas para identificar fatores associados ao reparo (p<0,05). Resultados: o TE mostrou 71,58% de cicatrização completa e 23,16% de cicatrização aceitável. O RNCCR mostrou 80% e 20% cicatrização completa e aceitável, respectivamente. Idade, sexo, tipo de tratamento e dor pré-operatória não foram estatisticamente significantes para o processo de cicatrização (p>0,05). Os pré-molares apresentaram a maior chance de reparo periapical. O cimento Pulp Canal Sealer mostrou maior chance de reparo periapical quando comparado ao Sealapex (p<0,05). Conclusão: o TE e RNCCR utilizando um protocolo de alargamento foraminal, proporcionaram um prognóstico favorável da cicatrização periapical

Teaching experiences during the SARS-COV-2 pandemic in a Brazilian School of Dentistry

The coronavirus outbreak (2019) represents a public health emergency of global concern. Several measures have been taken to minimise the risk of infection among the population, including social distancing, working from home, closure of non-essential activities since the detection of the first case in Brazil. This study describes the teaching experiences during the SARS-COV-2 pandemic in a Brazilian School of Dentistry. The State University of Campinas (UNICAMP) was the first public university in Brazil to stop all the classroom activities on 13th of March 2020 due to COVID-19, followed by other universities. UNICAMP developed several initiatives and created a special support page for digital teaching, where it is possible to obtain guidance, support materials for teachers and a space for exchanging messages (e-mail and chat) for specific guidelines. UNICAMP has started lending computer equipment to undergraduate and graduate students according to socioeconomic criteria. Along with the equipment, 500 chips have been delivered with 10 GB of internet so that these students are able to access the network and carry out the remote activities related to their courses. In conclusion, quality education is the key-element in forming high-quality professionals that will in a near future provide health care for the community, be part in international research groups and become lecturers

Effect of intracanal medications on the interfacial properties of reparative cements.

OBJECTIVES: The purpose of the present study was to evaluate the effect of calcium hydroxide with 2% chlorhexidine gel (HCX) or distilled water (HCA) compared to triple antibiotic paste (TAP) on push-out bond strength and the cement/dentin interface in canals sealed with White MTA Angelus (WMTA) or Biodentine (BD). MATERIALS AND METHODS: A total of 70 extracted human lower premolars were endodontically prepared and randomly divided into 4 groups according to the intracanal medication, as follows: group 1, HCX; group 2, TAP; group 3, HCA; and group 4, control (without intracanal medication). After 7 days, the medications were removed and the cervical third of the specimens was sectioned into five 1-mm sections. The sections were then sealed with WMTA or BD as a reparative material. After 7 days in 100% humidity, a push-out bond strength test was performed. Elemental analysis was performed at the interface, using energy-dispersive spectroscopy. The data were statistically analyzed using analysis of variance and the Tukey test (p < 0.05). RESULTS: BD presented a higher bond strength than WMTA (p < 0.05). BD or WMTA in canals treated with calcium hydroxide intracanal medications had the highest bond strength values, with a statistically significant difference compared to TAP in the WMTA group (p < 0.05). There were small amounts of phosphorus in samples exposed to triple antibiotic paste, regardless of the coronal sealing. CONCLUSIONS: The use of intracanal medications did not affect the bond strength of WMTA and BD, except when TAP was used with WMTA.

Influence of chlorhexidine and zinc oxide in calcium hydroxide pastes on pH changes in external root surface.

The objective of this study was to assess the influence of chlorhexidine (liquid and gel) and zinc oxide in calcium hydroxide (CH) pastes on root pH in simulated external resorption. One hundred human anterior teeth with a single root canal were selected. After decoronation and root canal instrumentation, the specimens were divided into 4 experimental groups and 1 control group (without intracanal paste): CH + saline (CH+S), CH + 2% chlorhexidine liquid (CH+ CHX), CH + 2% chlorhexidine gel (CH+ CHXg), and CH + 2% chlorhexidine gel + zinc oxide (CH+ CHXg+ZnO). pH was measured using a microelectrode at 3 and 24 h, and 1, 2, 3, and 4 weeks after inserting intracanal pastes. Data were analyzed statistically using an ANOVA and Tukey's test (p < 0.05). The CH+CHXg+ZnO group had the highest pH values throughout (p<0.05). The CH+S and CH+ CHX groups had the highest pH values after 1 week and the CH+ CHXg group after 2 weeks. CH+ CHXg maintained the highest pH until the fourth week compared with CH+ CHX (p < 0.05). The control group remained at a neutral pH at all evaluated times. It can be concluded that chlorhexidine solution or gel maintained the alkaline pH of CH, and chlorhexidine gel allowed a slower decrease in pH over time. CH+ CHXg+ZnO showed the highest pH values and was an effective intracanal medication for maintaining alkaline root pH in the area of resorption.

Influence of chlorhexidine and zinc oxide in calcium hydroxide pastes on pH changes in external root surface

Abstract The objective of this study was to assess the influence of chlorhexidine (liquid and gel) and zinc oxide in calcium hydroxide (CH) pastes on root pH in simulated external resorption. One hundred human anterior teeth with a single root canal were selected. After decoronation and root canal instrumentation, the specimens were divided into 4 experimental groups and 1 control group (without intracanal paste): CH + saline (CH+S), CH + 2% chlorhexidine liquid (CH+ CHX), CH + 2% chlorhexidine gel (CH+ CHXg), and CH + 2% chlorhexidine gel + zinc oxide (CH+ CHXg+ZnO). pH was measured using a microelectrode at 3 and 24 h, and 1, 2, 3, and 4 weeks after inserting intracanal pastes. Data were analyzed statistically using an ANOVA and Tukey's test (p < 0.05). The CH+CHXg+ZnO group had the highest pH values throughout (p<0.05). The CH+S and CH+ CHX groups had the highest pH values after 1 week and the CH+ CHXg group after 2 weeks. CH+ CHXg maintained the highest pH until the fourth week compared with CH+ CHX (p < 0.05). The control group remained at a neutral pH at all evaluated times. It can be concluded that chlorhexidine solution or gel maintained the alkaline pH of CH, and chlorhexidine gel allowed a slower decrease in pH over time. CH+ CHXg+ZnO showed the highest pH values and was an effective intracanal medication for maintaining alkaline root pH in the area of resorption.

Demographic profile of patients and clinical characteristics of dental emergencies at the outpatient clinic of a Brazilian Dental School / Perfil demográfico dos pacientes e características clínicas das urgências dentárias no Serviço de Plantão de uma Faculdade Brasileira de Odontologia

ABSTRACT Objective: This retrospective study evaluated the demographic profile of patients and the clinical characteristics of dental emergencies in a brazilian university outpatient clinic. Methods: During the period from June 2013 to May 2014, data were collected from 1.345 clinical records. Chief complaint, gender, age, systemic alteration, clinical inspection of the affected tooth, pulp and periapical diagnosis, the type of procedure performed and whether there was the need for post-operative systemic medication. Data were analyzed using the SAS software and chi-square test was used to verify the presence or absence of statistical significance at a level of 5%. Results: Dental pain (53.3%) was the main reason why people attended the emergency service, that is, female patients (63.1%), aged 29-48 years old (42%), patients without systemic conditions (75%), and patients with decayed teeth (25%). In addition, involvement of lower molars (29.81%) and diagnosis of irreversible pulpitis (30.42%) were the most frequent findings. Emergency endodontic treatment (45.8%) was the most performed procedure. Irreversible pulpitis (30.4%) and pulp necrosis associated with acute apical periodontitis (21.9%) were the most frequent conditions requiring emergency endodontic treatment, and in most cases, there was no need for post-operative systemic medications (95.7%). Conclusion: The prevalence of endodontic emergencies during the period of one year emphasizes the need for more accurate diagnosis and the importance of providing this service to the population.

RESUMO Objetivo: Este estudo retrospectivo avaliou o perfil demográfico dos pacientes e as características clínicas das urgências dentárias em um Serviço de Plantão de Urgências de uma Faculdade brasileira de Odontologia. Métodos: Durante o período de junho de 2013 a maio de 2014, os dados foram coletados de 1.345 registros clínicos, com informações sobre a queixa principal, gênero, idade, alteração sistêmica, inspeção clínica do dente afetado, diagnóstico pulpar e periapical, o tipo de procedimento realizado e se houve necessidade de medicação sistêmica pós-operatória. Os dados foram analisados usando o software SAS e o teste do qui-quadrado foi utilizado para verificar a presença ou ausência de significância estatística ao nível de 5%. Resultados: A dor dental (53,3%) foi a queixa principal mais encontrada. Pacientes do gênero feminino (63,1%), com idade entre 29-48 anos (42%), sem condições sistêmicas (75%) e com dentes cariados (25%) foram os mais prevalentes. Além disso, o envolvimento de molares inferiores (29,81%) e o diagnóstico de pulpite irreversível (30,42%) foram os achados mais frequentes. O tratamento endodôntico de urgência (45,8%) foi o procedimento mais realizado. A pulpite irreversível (30,4%) e a necrose pulpar associada a periodontite apical aguda (21,9%) foram as condições mais frequentes que necessitaram de tratamento endodôntico de urgência e, na maioria dos casos, não houve prescrição de medicamentos sistêmicos pós-operatórios (95,7%). Conclusão: A prevalência de urgências endodônticas durante o período de um ano enfatiza a necessidade de diagnósticos mais precisos e a importância de oferecer esse serviço à população.

Influence of ethanol on dentin roughness, surface free energy, and interaction between AH Plus and root dentin.

This study aimed to evaluate the influence of different ethanol concentrations on dentin roughness, surface free energy, and contact angle between AH Plus and the root canal dentin. One hundred human maxillary anterior teeth were split longitudinally and 200 dentin specimens were polished to make the surface flatter and smoother. An acrylic bar was positioned between two dentin specimens and impression material was added to create a block, simulating an instrumented root canal space. Specimens were removed from the mold and cleaned in an ultrasonic bath for 10 min. Thereafter, dentin specimens were divided into four groups (n = 50) according to the drying methods used: a) wet: vacuum only, b) paper points: vacuum + absorbent paper points, c) 70% alcohol: 70% alcohol (1 min) + vacuum + absorbent paper points, and d) 100% alcohol: 100% alcohol (1 min) + vacuum + absorbent paper points. A rugosimeter and a goniometer were used to verify the roughness (Ra) and to measure the surface free energy and the contact angle between the AH Plus sealer and the root canal dentin. ANOVA and Tukey tests (α = 0.05) were used for statistical analysis. The 70% and 100% ethanol groups showed significantly decreased roughness as well as increased surface free energy in the root canal dentin when compared to the wet and paper point groups. In addition, ethanol significantly reduced the contact angle between the AH Plus sealer and the root canal dentin. Ethanol solutions (70% and 100%) provide better wettability of AH Plus sealer on dentin surfaces.